Can't Find it? Search Our Store!
Trucks and SUVs Winch
A TOUGH WINCH AT A GREAT VALUE
The Tabor 9K by Warn Industries comes with an automatic brake, 100 ft of wire rope, low-profile freespool actuator and a 3-stage planetary geartrain. It's a whole lot, for a whole little. |
| TABOR 9 SPECS | | Part Number: 900560 | | Rated Line Pull: 9,000 lbs. (4080 kgs) single-line | | Intended Use/Application: Vehicle Recovery / For Trucks and SUVs | Duty Cycle Rating:  | | Motor: Gen II, Series Wound | | Remote Control: Remote switch, 12' (3.7m) lead | | Geartrain: 3-Stage Planetary | | Gear ratio: 216:1 | | Clutch (freespooling): Sliding Ring Gear | | Brake: Automatic Direct Drive Cone | | Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm) | | Weight: 89 lbs. (36.3kgs.) | | Wire rope: 100', 5/16" diameter (30m, 8mm diam.) | | Fairlead: Roller | | Recommended Battery: 650 CCA minimum for winching | | Battery leads: 2 gauge, 72" (1.83m) | | Finish: Powder Coat | |
| 12V DC PERFORMANCE SPECS | Line Pull Lbs.(Kgs.) | Line Speed FT./min(M/min.) | Motor Current | Pull by layer layer/Lbs(Kgs.) | | 0 | 29.5 (8.99) | 71 amps | 1/9000 (4082) | | 2000 (910) | 13.7 (4.18) | 185 amps | 2/8190 (3715) | | 4000 (1810) | 9.5 (2.90) | 277 amps | 3/7500 (3402) | | 6000 (2720) | 6.8 (2.07) | 372 amps | 4/7010 (3180) | | 8000 (3630) | 5.1 (1.55) | 464 amps | | | 9000 (4080) | 4.5 (1.37) | 508 amps | | |
| |
| Above performance specs are based on first layer of drum |
|
| Winch Dimensions: 20.8" L. x 6.3" D. x 6.4" H. (528mm L. x 160mm D. x 182mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |